How to make liquid wax for car with his hands

Polonès1

How to make wax for cars with his hands? It is no secret that the modern chemical products can be very expensive. It is not surprising that many car owners tend to save. Well, someone likes to do things to the machine with their hands. So this article is for all of them.

Why the need of tools of polishing

Why is it important periodic polishing for the body and the exposed metallic parts and components, we have already spoken. Not only restores the beautiful luster and appearance, but also successfully fights with small defects, such as cracks, chips, rust. In addition, the surface of the body becomes less sensitive to the difficulties of the action of the environment.

There are many cosmetic products in order to make the car look more attractive in the eyes of others. They are usually sold in tubes, bottles, sprays, and, therefore, does not require any polirovochnyh machines for the application. Unfortunately, they are not available for all categories of drivers, which is why many of them are thinking how to make a car wax at home.

The technology of preparing polishes

Before proceeding to the development of the home production, it should be remembered that any poliruyuzhego type should contain a certain amount of abrasive. The other essential element is the binder component, in other words, the Foundation, which may be both liquid and silicone.

Preparation of material abrasive to clean the body is reduced to the following steps:

• you need to burn a small amount of paint (about 200 grams), but it is necessary that it was hromososoderzhazhei. This can be done in a campfire or with a soldering iron;
• another option is to buy dihromata ammonium, followed by the cream;
• in this process was to train the secretion of hydrochloric acid that has disappeared after the oxidation.

Now you need to make a binder component in the likeness of the one that is used in the well-known paste of GOI. With this purpose, should be mixed together 2 parts fat, 1 part of acetic acid. If all of this is mixed with 7 parts of oxide of chromium and a couple of drops of kerosene. The results obtained components best match if they are in the process of mixing a little hot.

Recipes from other media polishes

Another recipe is associated with a preparation means to restore the paint, if the lining has suffered damage. You can do it at home, if the regular use of the clay. Even a small amount in 100 grams will be enough to carry out polishing up to 10 times. All the procedures are necessarily made cloth based on microfiber because it is different from soft in the lining of the structure.

Another popular tool that is well restores the paint on the car is the so-called "Polish wax". It can be bought in any Autoshop, but it's easy to make yourself to save money. We will have beeswax, which is the best to purchase from the trust the seller that the product was very good quality. The other component is ordinary turpentine. The wax finely sliced, crumbled and melted to a liquid state in a steam bath or in the microwave.

In a part of the hot wax is poured into the same amount of turpentine with constant stirring, ensuring even distribution. After this polishing wax will be poured in any container or bowl and wait full cooling. Instead of turpentine, you can use ordinary vegetable oil, which creates a fat base.

Polonès2

Rules of application of the

Now a few words about how to apply Polish on the chassis. Before the surgery you need to prepare the necessary tools: gloves, mask or respirator to protect your lungs, a soft sponge, fibru of hand polishing.

Deserves special attention in the preparation of the car for polishing. The car must be washed and cleaned of the remains of all the existing information of the pollution. Once the body is sufficiently dry, the treated area is useful in addition degreased diluted with white spirit. Before applying new Polish, remove the remains of the old to allow the composition to gain a position on the surface.

To carry out the polishing procedure in a ventilated garage if the lighting is sufficient. However, it is better to do it with the open sky, in dry weather at temperatures of 10 to 30 degrees Celsius. It is desirable that the top was a canopy, which will eliminate the ingress of dirt, dust, or unwanted light of the sun, which distort the perception.

How to make Polish wax

Naturally, this wax is easy to shop in a specialty store. But if it is possible to make the wax yourself, why not use it? In addition, the time that it takes a bit, but at the price of ingredients is much cheaper finished product.

Benefit polirovochnogo wax

Modern furniture is often made of materials that the wax polishing is not necessary. But antique furniture and some interior wood without layers of wax to lose its appeal. After polishing the tree, literally, back to life, regaining color and Brightness.

Why wax? The composition of the wax is composed of three large groups of substances: esters, free fatty acids, and carbohydrates. The wax is oxidized very slowly, so that the oxidation can be neglected. Under certain favorable conditions, the wax maintains its properties for centuries, and even millennia. Because tyaguchesti material, the boiling point of the wax of bees, more than any other wax. The beeswax is completely immune to moisture, but interacts also with solvent, making wax the best base for the manufacture of the emulsion. Polishing wax gives the treated wood a silky and soft glow.

In addition, bee's wax emulsion based on can be a great alternative for many varnishes that contain chemicals harmful, have persistent bad breath that remains in the room for a long time, even after the varnish has dried. But polirovochnaya mixture of beeswax, on the contrary, an absolute eco-friendly, no smell and it is very resistant to external influences after the application of a wooden surface.

Polonès3

Make a polished mix

There are some recipes polirovochnyh mixtures. Everywhere the main ingredient acts as the wax of bees. According to the assumed proportions of the components, the mixture may be liquid, pasty or solid. More precisely, the density of the mixture depends on the amount used of the solvent: the more, the more liquid is a mixture.

The traditional mix polirovochnaya

Ingredients:

• Beeswax. You can buy it in a specialty shop, or better yet, buy directly from the beekeeper, less costly, and definitely will receive a quality product.
• Turpentine. In general, the turpentine take in the same amount as the wax, in the proportion of 1:1.

Produce a mixture of

1. The wax should crumble to pieces and melt, either in a water bath or in the microwave.
2. The hot wax slowly and carefully began to pour the turpentine, stirring all the time.
3. The finished mixture is poured into a suitable container, for example, a can of cream of milk, and to the left until it is completely healed.

But turpentine is often recommended to replace other solvents. Despite the fact that turpentine is an organic product, that is, at the same time, another dangerous chemical that can cause irritation of the eye, irritation of the skin, lung damage and Central nervous system (if the smoke of the turpentine to breathe). But, in any case, corresponds to the finished polirovochnoi mixture based on turpentine, the greater the risk that the experience in the process of preparation of the mixture.

Instead of turpentine, you can use other solvents, such as various vegetable oils. In principle, you can use any of them. Often, especially for the kitchen polirovochnoi mix with olive oil. In addition to the oil and the wax do not need anything more. Polirovochnaya mixture based on olive oil can be used to cover any type of wood.

Polirovochnaya a mixture of olive oil

Ingredients:

• Beeswax — 2 tablespoons;
• Olive oil — 6-8 tablespoons.

The wax crumble into small pieces, mix with the olive oil. Melt the butter mixed with wax in a water bath or in the microwave. If desired, in melted wax, you can add suitable extracts, but it is at Their discretion and not necessarily. The mixture as poured into suitable containers and leave to cool.

Polirovochnaya mixed with oil of jojoba

This polishing wax based on safe oil is ideal for polishing wooden children's furniture and toys, which the child can draw on the mouth. The mixture is the absolute security of composition, even for very young children, does not cause allergies.

Ingredients:

• Beeswax — 50 mg;
• Oil of Jojoba — 150 ml;
• Optionally, you can add the extracts and vitamin E.

Ratio: 1 part of wax, 3 parts of oil of jojoba. The wax is melted in the water bath and add the oil. All funds, pour into containers and leave to cool. The ratio of oil to wax can be changed depending on the mixture, the consistency of what you expect to get.

Polonès4

The benefits of the treatment body wax

If RUBBED the back of car wax and how to do it correctly? In the view of the motorists in this account are divided, some for and some against. How it works the wax and what effect it offers. To treat the body that you can use natural waxes of vegetable(for example, wax of Carnauba). The physical properties, natural and synthetic waxes are very similar. Both wax its fat like texture with a melting point of from 40 to 90 degrees, which does not dissolve in water, no reaction with acids and alkalis.

What to expect the effect of working outside of the wax?

The wax has been used for the treatment of the body, in order to give an elegant appearance to the car. But in addition to this wax protects the car from various external influences. When the machine surface is rubbed with wax, is heated, melts and penetrates into all the cracks are in the surface of the body. As a result of this procedure, the surface of the car is aligned. The surface of the body becomes soft, so that the rays of the sun is reflected, not scattered in this case and because of this, the creation of this effect, the mirror image effect.

In addition to that the car shines like new, the wax protects the paint of the car. The wax forms on the back of some hydrophobic film whose properties are to dispose of the water. Since the wax does not react with alkalis and acids, thus protects the body from any chemicals and some natural substances, such as the resin of the trees of conifers. From the surface of the grated wax resin easier to clean and not leave even a trace. As well as other dirt will be easier to escape to the wash, respectively, the body is more protected from minor cracks, which can arise from a car wash.

The pros and cons of wax.

For the treatment of the body uses three technologies:

• Treatment with cold wax;
• Handling hot wax;
• Treatment of the hard wax.

What is the difference between them? The hot wax before applying the first diluted in hot water and then applied to the body. This method helps to obtain a fairly thick layer of wax that helps protect the machine not only of different pollutants, but also from the corrosion. The disadvantage of this wax is its fast hardening, can be easily nalipnut dust resulting from the machine perhaps not so much Brightness.

Cold wax is applied to the surface of the body by the friction of the surface of the painting. It is very easy to apply and creates a mirror Shine and protects the surface from damage and microcracks. But the degree of protection is much lower than the hot wax.

Solid wax provides a long-lasting effect, it is sufficient to apply 3-4 times a month. Hard wax is much more difficult to apply on the surface of the car, but provides a better protective effect and more attractive.

Polonès5

Hair removal with wax in the car with his hands

To preserve the car in its original state, is regularly concerned with the protection of paint materials. For this there are a series of hard waxes designed to protect the car body from damage in the environment.

What to protect the solid wax in the first place: — attenuation of the paint to the UV light. — bitumen spots on the bodywork of the vehicle. — the damage of coatings under the influence of reagents (salts) in the winter.

The application of solid wax requires no special skill and can be done at home.

1. Thoroughly wash the car.
2. Dry.
3. Derived from bitumen stains the body. (with a cloth and acetone)
4. Obezzhirivaem the body. (recommended)
5. Apply the hard wax in a circular motion around the body of the car.
6. Wait about 5-10 minutes to dry and wax with microfiber Polish remnants around the body.

After processing the body of the car shines like new. Hide small scratches. The machine becomes more resistant to stains, such as water and dirt completely shot outside of the paint of your vehicle.

For permanent effect, it is necessary to apply hard wax with the periodicity once in two months.

10.08.2018