To frequent car washes in the fall and in the spring, the drivers spent a lot of time and nerves. But from this situation there is an exit, because it is possible to wash a car is much lower and, at the same time will always be presentable. It is only necessary to take care of all the parts of the body, using liquid glass for cars. This Polish is currently considered to be very popular and more and more drivers each year prefer this. This happens for a reason. Liquid glass has many advantages that attract the customers. But in addition to advantages, with this tool and some disadvantages, it also doesn't hurt to know in advance.
To start it is to know that the liquid crystal display. This is a special tool designed for the surface treatment of the bodywork of the vehicle. The Polish is also allowed to use wheels and glass. After processing the vehicle with liquid glass it is necessary to wait a certain time to dry. The only way you will be able to get a lock in the treaties of base and last much longer. As a result, the parts of the body of the car formed an additional protective layer, which helps for a long time to preserve the beautiful appearance of the painting.
After the previous advantages and disadvantages, a conclusion — that it is better to Polish the body of the car with liquid glass. Even if the vehicle will get under a rain, liquid crystal will not disappear. It is also important that the tool is based on the surface for several months, but this characteristic only when it is well applied to the surface of the body.
1. Make sure to check that all required is present in the set of varnishes. Normally with a liquid crystal supplied: dispenser, the tool itself and a hardener, soft cloth, glove, sponge and a towel. In this case, if some things to polishes not included, recommend them to purchase. Depends on the result of the work carried out.
2. The composition securely held in the body should be well washed the vehicle and dried. Special attention should be paid to places of difficult access. Normally, in these areas accumulate a lot of dirt. In conclusion, you want to degrease the surface parts of the body. It is possible to use white spirit mixed with water. Not allowed in this case to use the media that contain silicone or lower spirits.
In this case, if pre-CU was treated with other Polish before applying the liquid crystal must be sure you want to remove. Otherwise, the coating can not give a proper protection for the car.
3. It is desirable to produce a body Polish in a dry place and ventilated. This will suit a garage or even a carport. It is important that the rays of the sun, the dust and the dirt to fall on the surface.
4. After the preparatory phase can begin to Polish your car with liquid crystal. You need to start with a small plot. The treatment of the body slowly, in a circular motion. After applying the liquid crystal in a detail, you can proceed to the other. In some situations, the carrying out of repeat the treatment.
After this it only remains to wait for the Polish to dry completely.