Liquid crystal display for a car of the application of the technology

Liquid crystal display for cars recently appeared on our market and on the Internet can be found in several reviews. What are the advantages and disadvantages of this type of coating, and whether or not to use it? To these questions we want to answer in our paper.

What is the liquid glass for car?

The purchase of a car, we make a lot of money, but because I want that it keeps on the move and keep your presentation. But the weather conditions, broken roads, and the lack of appropriate storage conditions cause significant car body damage: scratches, color fade, tarnish lacquer coating.

after liquid crystal

To protect the body from factors adverse, and also to restore to its original appearance, the manufacturers of car care products suggested the use of an innovative wax-liquid glass car. This tool was known before, was successfully used in the construction, chemistry and textile.

Liquid glass used for production of acid resistant cement and concrete, for the impregnation of textiles, manufacture of refractory paints and coatings for wood (flame retardants), consolidation of weak soils, as adhesive for binding cellulosic materials in the production of electrodes for the purification of the plant and the machine oils, etc. Since 2008, several Japanese manufacturers of car polishes started production of polishing based on liquid crystal. Wikipedia

A pioneer in the manufacturing of this kind of varnish was the Japanese company, whose products are still considered the best in this category. It has changed the composition of the liquid crystal, which earlier was widely used in the production of construction materials, to replace the silicates of sodium and potassium silica. Thanks to him, liquid crystal display for cars have the ability to:

  • to protect the body of the earth, the corrosion and minor mechanical damage;
  • mask existing defects in the paint (painting).

When applied to the body of the substances included in the composition of the liquid crystal enters into a chemical reaction with the paint of the car, forming in the result, solid protective coating, capable of repelling dirt and water and protect it from mechanical damage caused by crushed stone and gravel.

Advantages and disadvantages

According to the manufacturers, liquid glass for car in great extent, the duplicates of the properties against the rain and is capable of:

  • to protect against corrosion. Acts as waterproofing, water repelling and dirt;
  • to prevent the formation of scratches and chips that appear under the impact of small stones;
  • to protect from ultraviolet radiation. With this type of coating, in the process of the burning of paint will slow down significantly;
  • to give an attractive appearance. The tool creates a mirror effect and adds colour, depth and volume.
application

The positive properties of this wax include:

  • durability. Manufacturers specify a service life of 2-3 years, but given our roads has a duration of one year;
  • the resistance to the temperature. Liquid crystal display for car does not lose its qualities even at very high temperatures.

Unfortunately, this auto-polishes, like everyone else, not perfect. Among the major shortcomings that contribute to it:

  • the complexity of the application of the technology. If it breaks, the covering however the above properties and quickly destroyed;
  • high in comparison with other polishes cost.

As for the comments of owners who have experienced this tool, which are the following: effect of the implementation will only be the case if the Maturity of the technology application.

The technology of application of liquid glass with their hands

Before the application of liquid crystal first decide the place of work. Must be protected from direct sunlight, dust and wind, but well ventilated. The next course of action will be like this:

  • thoroughly wash the machine and leave to dry well. Dirt and moisture create a layer that polishes the coating is badly interact with the painting, which is fixed safely and quickly take off;
  • to clean the body of the other polishes and degrease. Suggested to use a solution of white spirit. In any case, do not use solvents, developed on the basis of silicone, which allows the connection of self-polished the surface of the machine;
  • apply liquid glass to a car with a sponge (that comes with the set). RUB the tool for longitudinal and not circular movements. The substance that is poisonous, so make sure you use gloves of protection;
  • when the Polish dries up a bit (visually slightly turbid), the Polish, the treaty of the surface with a soft cloth and let it dry for 4 hours.
the result

After this time, the car can already be operated. But it is best to give effect to make itself a place, therefore, if possible, do not use the machine for at least 12 hours. In two weeks not to rely on automatic cleaning, but the manual is acceptable, since it is not able to damage the coating.

15.08.2018