The advantages of liquid crystal to protect the bodywork of the vehicle

liquid glass for car

The latest trend of the manufacturers of polishes liquid glass for cars. Material with the same name, known for nearly two centuries. This files most often is an aqueous alkaline solution of potassium or sodium. It has excellent properties of adhesive and is water resistant, so it is often used in construction for waterproofing. But for the protection of the bodywork of the vehicle uses a different chemical composition. Is the silicon dioxide, which may be made of glass of synthetic.

Japanese innovation

The impulse to use this material for the manufacture of varnishes gave Japan. That is where the first to use liquid crystal as a protective coatings of a car. He spent the 2008 and gradually came to us. This protection is gaining popularity due to the fact that it rests on the surface of the car is extraordinarily long. The developers say about two or three years of reliable operation, but domestic car dealers to reduce these figures, for a year, citing the unusual weather conditions and the quality of the roads that was a glass door out faster.

After two or three years of operation of the paint (painting) the car begins to require advanced protection. It seems that the chips, scratches, cracks and scrapes. In the end, it begins to lose the appearance. Have the different polishes that are generally made from wax, silicone and various polymers. They returned the vehicle the appearance, but this effect does not last long, so the procedure should be repeated again and again. Application liquid crystal protection coating eliminates this problem. New technologies have radically changed the possibilities of maintenance of the car – now, your body can be protected for a long time. Many people wonder where to get this miracle of a tool, and if it can be applied with the hands or the need to visit the service center.

Japan is the undisputed leader in the protection of the body from the effects of the environment. By and large they serve as a point of reference for brands of other manufacturers. Japan has managed to create a great care of the car, one of a kind contemporary practice are not available. Liquid crystal applied to the chassis of a car has the following properties:

  • high resistance and high durability;
  • dirt and water repellent effect;
  • does not have the abrasive properties;
  • retains the original color of the body and gives a mirror Shine.

There are No restrictions for the application of this coating on the car body, with the hands does not exist, you can verify this by looking at the video.

Collecting polishes

The set of varnishes includes everything you need. Any special tools for the application of coatings to the body with their own hands is not necessary.

As part of a set that you can buy, and if not, by order, include:

  • the main of the composition and the agent for curing;
  • pipette to mix them;
  • polishing cloth of the body;
  • gloves of protection;
  • sponge and towels.

It is important that the set comes with instructions made in Russian. But, as the saying goes – better to see once than hear a hundred times, in order to see the video on how the coating is applied to the body, in reality, do not interfere.

The preparation for the application

Before treatment, the vehicle should be well-prepared, that is to say:

  • well clear of the contaminants;
  • wash thoroughly;
  • degrease and dry.
The preparation for the application

If he is covered with Polish that has to be removed. For the preparation of the body of the poor quality alcohols or compounds that contain silicone.

It is very important that between the paint and apply the liquid glass was not of the layer intermediate, which may impair adhesion.

The temperature during the execution of the work must be between +10 °C to +40 °C. Therefore, if the work is done in the winter, the garage must be heated. Do not apply liquid glass on a heated surface, so that the vehicle does not have a lot of time before this stand in the sun. In practice a full body treatment lasts 3 to 4 hours.

Removal works

General rules when working with liquid crystal display are the following. The protection of the painting of the body is applied in a place protected from sun, humidity and dust. Well wash the garage for these purposes is fine. Before the hands completely treat the entire surface of the body, it is best to choose a small area and test the tool. Before the start of the works should take another look at the video to remember the sequence, the goals and methods of working.

After you apply the liquid glass to the outside, the car should be left to dry for at least six hours for its full adhesion to the paint. The process of final stabilization of the structure of the material is long enough, so that once a week, a banned vehicle wash chemically active agents.

A very important point at the time of applying the protection of the body is the removal of the work. If you carefully watch the videos of how you made with your own hands, you'll see that each element is processed separately. This is due to the fact that the composition rapidly sets and a large area lcp body you just don't have time to grind. If the material hardens, then remove it would be very difficult.

You should pay attention that the products are produces in two versions: for light and dark cars, so it is better to buy or order a tool, appropriate in color.

According to the manufacturer Polish Wilson, Japan enjoy the metropolis up to 50 visits to a car wash that is certainly an extraordinary result. Even if we have to make allowances for different weather conditions and divide this number by two, the result will still be impressive.

The effect resulting

The effect resulting

Liquid glass for car is, without a doubt, the best up-to-date tool to protect the layer of paint. And the leader of this trend is Japan. The effect of the use of resources is particularly evident when we look at the video, it looks like the body of a car, before and after coating his hands. After the work is done, the car looks perfect, like it came off the Assembly line. This is evident in the numerous testimonies of those who have the time to try this kind of varnishes.

Now the body can not be afraid of the ground, because the treatment will be immune to it and left to adhere to the paint. The result is a small amount of water in the bottle will be enough to totally put in order the appearance of the body after a long trip on dirt roads. Will also change the behavior of the car under the rain. With him almost completely disappear dirty stains in abundance that occur from the falling drops with a standard treatment of the body.

The values

The cost of this type of media to protect the vehicle body is significantly higher than the standard polishes, but taking into account the duration of the operation and additional advantages may be acceptable. The tool does not require any more tool that allows you to save it. But keep in mind that the surface of the body before applying should be cleaned with care. This means that we must take into account the cost of these works, which require the purchase of additional material. If we assume that Japan is a leader in the manufacture of means of transport, for the deep cleaning you'll have to buy another clay. On the Internet there are comments on the joint application of these tools, pictures and videos and are very optimistic.