With time the paint of a car fades, cracks appear, which finally will be very noticeable and spoil the appearance of the car. If you leave everything as it is, the water, the earth, the sun will contribute to the growth of cracks in the varnish. The drivers often struggle with microcracks using the polishes. But it gives a temporary visual effect. To completely remove defects on the surface of the body and stop the growth of microcracks, scratches, small chips, you can apply the liquid wax for cars.
Why a car cover with wax? Coating machine wax contributes to the formation of a protective film to the paint surface. As a result, you will get:
The advisors of the Department of chemistry can offer different kinds of wax:
Attention! For new cars, it is recommended to apply wax that contains abrasive components.
Wax to the bodywork of the vehicle is divided into types depending on the application:
If you are still full of doubts, what is the wax for car is best, without prejudice to know that the origin of the wax is different. In this sense, the wax is divided into the following types:
It is good to know! The origin of the wax, in no way affects its quality.
How to apply wax on the car? To wax well "sat" in the paint and to carry out its function of protective, first you have to wash the car in a non-contact way, in little et succendam its air (but not until completely dry).
Important! Apply liquid wax you need on a wet surface.
We will examine the question of how to use the wax for car. Liquid wax is diluted in hot water (the temperature of the water listed on the package the liquid wax) in a certain ratio (indicated in the instructions). Remember that the difference in the temperature of the dissolution of the wax and the body of the car must not be more than 20 degrees.
How to apply liquid wax for cars? The wax is applied evenly to a small area of the car and leave for 1-2 minutes. The excess wax washed with water. Waxing should start with the roof of the car and slowly go lower.
Now the machine is poured with air (to remove excess moisture). Then, the wax is rubbed in a circular motion over the surface with a soft sponge, cloth or a soft cloth (a kind of polishing by hand). The whole process of coating of car wax can take about 20-30 minutes. Waxing a car with the hands makes no difficulties (except for the application of the foam composition).
Please, note! To apply the wax in the sun is strictly prohibited.
Keep in mind the question of why you need the wax and what benefits you can get from its use: