How to apply liquid, solid, warm, and cold wax on the car

Wax for cars, a form special protection film on the surface that can protect the body from minor scratches. It is worth paying special attention to the restoration effect that have substances of this type. They are able to disguise the flaws.

Another important property of the quality of the wax for a car is to prevent the growth of defective areas. When the layer of protection that applies to the damaged area, which prevents various substances, which can aggravate the situation.

cold wax for car
Important! Wax for car avoids the damage to the surface of the machine may receive from a variety of chemical products, water and salt.

Not to mention another important property of this substance. It is not allowing corrosion to eat away at the body of the vehicle. A nice bonus is the UV protection.

If we are talking purely the visual component, the wax for a car gives the car that Shine that you saw in the showroom when I bought it. Quality substance which may make your machine new again. But to do this correctly, RUB the tool on the surface to carry out polishing.

When the car is waxed, water runs down much faster. This is to avoid the formation of stains, which can often be seen in the hood, or the roof after the rain. In addition, the coverage of this kind allows much less to take the car to the car wash.

What kind of wax that is there

Depending on the properties

The automotive industry is in constant evolution. As a result, each year there are more means to effectively care for the vehicle. At the time that it is possible to assign this type of wax depending on their properties:

  • spray
  • liquid,
  • a solid mass,
  • synthetic.

Among the professional car assumed that the spray is one of the least functional type. The fact that it is very unstable to external influences.

Attention! Only a couple of washes and waxes for a car in the form of a spray must be clean.

Despite this, the car wax in spray form has a clear advantage — its a very simple and fast to apply. Therefore, if you urgently need to take the car for the purpose it is ideal.

Liquid wax for cars has a much higher resistance to external influences. But its application requires more time and effort. Fortunately, the process is fairly simple. Only need to wash the car, apply the product with care and grind.

Hard wax, in contrast with the two previous types can be applied on surfaces dried. So after the car is washed, you will have to wait until it dries. Of course, in order to speed up the process you can use construction hairdryer, but this device is not at all.

Attention! The main advantage of solid wax for cars is that it is able to survive during about 6 months.
cold wax for car pros

It is believed that the solid wax has greater resistance to external influences. It is very common to see the composition of the face and car shampoos. There are also separate funds in liquid form.

Depending on the origin

Wax for cars can be classified according to the substances which form the basis of the same. Now there are the following types:

  • briefly,
  • mineral,
  • vegetables
  • animals.

This feature is less often taken into account when selecting the wax for processing of the automobile. The fact that its effect on the quality parameters is minimal.

According to the method of application

Classify wax for cars can also be by means of the application:

  • cold
  • Penn,
  • hot.

Cold wax for cars is a liquid emulsion containing the cationic substance and the additive. The coverage of this kind can put their hands to every car owner.

The main drawback — fragility.

Hot wax for a car can be both natural and synthetic origin. Begins to melt when the temperature exceeds 90 degrees Celsius. This substance is considered to be the highest quality among all the types in this classification. It is able to maintain its performance throughout the year, if you have purchased the product good manufacturer.

Attention! The majority of substances with a heat method of application based on corrosion inhibitors.

To apply the hot wax needs water at the right temperature. After the substance to a divorce, with the help of a sponge polishing is done. The main drawback of this type is the high cost.

A foam wax to a car for their qualitative characteristics are the closest to the heat. However, if we take into account the application of the technology, they are totally different.

The fact that the foam wax can be applied to the car surface without using a special equipment. It is responsible for the creation of an emulsion with foam. For this to become a reality, the air takes water-a mixture of wax.

The use of this method of application guarantees the long-term explanation of the layer. This effect can be achieved through the use of additional equipment. It provides the most uniform distribution of a substance on the surface.

The subtleties of application

Apply hard wax

Hard wax has many advantages. It guarantees the reliability of protection of the car for a long time. But it became a reality during the application, you must follow this sequence of actions:

  1. Wash the car. On the surface there should not be insects, spots of tar and other dirt.
  2. Close all the doors in the room. In the body should not be exposed to dust or dirt.
  3. Dry the vehicle. For your application, use a dry sponge. If not sponge, adapting to a simple piece of soft cloth.
  4. Apply the substance in the car evenly.
  5. Means that you need to grind evenly on the surface.
  6. Wait until the protective layer has dried. To form a coating on the mat.
  7. Wipe off any excess.
  8. Take a piece of soft cloth and Polish the surface to Shine.

The cars need to manage in parts. This ensures that it is a protective layer that will give your car a second life and help to hide small defects. But to get a lasting effect it is necessary to use a quality tool. You must also follow a series of precautions:

  1. It is not necessary to apply the product in extremely hot or cold. The limit +6. The humidity should also be within normal limits.
  2. Never use a rough sponge.
  3. Avoid a pronounced transition between the polished areas.

Only three simple guidelines will allow you to avoid the mistakes that all beginners make. You should also remember that the life time of the protective layer depends largely on the frequency of washing the car and the weather.

Apply liquid wax

For the application of this substance in the car need to be washed. Immediately after this, it is desirable to flare the body with hot air. Ideally, this task will be to help manage a building dryer. If not, just wait until the car dries out a bit.

Attention! Cars do not need to finish cleaning.

Liquid wax is diluted in warm water. The proportion depends on the funds that you have purchased. The spray evenly in the whole body. Try not to miss the places. This will allow us to create the most balanced protection.

Once the substance is sprayed you should wait a couple of minutes. Then you have doused the car with water. This will help to get rid of the excess. Only now you can start to Polish the car. This procedure will give the surface Shine and will greatly improve the appearance of the vehicle.

Attention! Before polishing the body needs a flare of hot air.

With proper skill, the whole procedure takes about 20 minutes. Beginner for the application of substance and polishing may require a bit more, about 40 min. In any case, the process is not especially difficult. So that you can manage all.

Apply the hot wax

Start to apply the hot wax on the car with the choice of a suitable instrument. This is why it is necessary to pay attention to the label. It will be written for cars what color is suitable liquid.

Attention! Before starting the process, prepare the canvas.

The car needs to wash and dry. All work must be performed in a well ventilated area. Therefore, the surface must not fall into the direct light of the sun.

The wax diluted in hot water, then the sponge is applied to the vehicle. After this, polishing is carried out. As you can see, there is nothing complicated, this process is not represented.

Tip! A treatment similar recommended in the late fall.

To apply cold wax

This wax should be applied on a car after each wash. Fortunately, it is not particularly difficult. All you need is a spray bottle. Once you spray liquid in the body of the car, the remains should be washed with water.

Attention! Cold wax has a relatively low cost and allows you to quickly handle the car.

The results

If desired, the car can be applied to any type of wax. Only for a single species requires a special equipment in the form of a blower. The most persistent is considered a hard wax. The most available cold.