The wax is able not only to give the paint a Shine, but to protect the surface from damage. Therefore, we will discuss how to apply it to the body.
Before proceeding to the coating of the body of wax, you must wash the car and make sure that the painting is devoid of any contaminants. The dust and dirt on the surface can cause cause scratches. Use the car shampoo and, if appropriate, of clay for cleaning the body. The surface should be cool to the touch and be out of the scope of the direct light of the sun.
Dispense a small amount of wax on the foam applicator and apply it evenly over the surface of the body. The wax should be applied in one or two parts of the body at the same time. After a couple of minutes, wipe the surface clean and dry microfiber towel. Repeat this process on the rest of the body panels, avoiding emblems, glass, plastic and rubber.
If the logos still remains the wax, use spray cleaner and a brush to remove it from places of difficult access. After this, clean the parts with a clean microfiber towel. For more brightness and depth of color, you can leave the body to dry for 3-4 hours and then apply the paint with a thin layer of wax of Carnauba.