The best for polishing the car?

All the polishes (methods, respectively, and polishing) is pursuing two main objectives – restore the colors and give the car fresh, but also protect the paint from exposure to the weather (rain, snow, etc.).

To protect the body

Polish wax

More common and often more affordable option is the protection of polished. Its main task is to create a thin transparent layer between the atmosphere and the painting of the machine that it repel water, dirt, etc. most Often this role is fulfilled by the so-called hard wax.

Apply on the body moistened with a soft cloth, at least in the form of a spray, and after a while dries up, it makes the machine... Matt. The final step is the actual polishing. This cured composition is really reminiscent of a thin layer of dried wax, light soft and natural fabric (if done at home), or a polishing machine with a circle (the result is usually the same, except that the first option takes more time).

This type of polishing it is recommended to carry out twice a year, in autumn and spring. The need of the repetition stems from the fact that the applied wax is washed in the sink (the exact number of water treatments to specify difficult, it all depends on the density of the active foam, the temperature and the pressure of the water, etc.).

After the layer of hard wax machine would be a better Brightness and a protective layer are formed. When the car drips a drop of water, you don't stay, and roll, or have lumps and the movement fly, without stopping on the body.

For adult glitter

The second popular type of coatings polishing (sometimes referred to as professional, or abrasives). This process usually consists of three or four stages. In each one of them machine polishing machine structures with different task from the largest to the smallest. The first or the second type of varnishes remove a micron layer of paint/Polish from the car, and the next gives the paint Brightness.
The main objective of restorative polishing the body to get rid of the small scratches, shallow. It is recommended to perform this type of Polish once a year to avoid unnecessary violence of paint, and a large number of stretch marks has to be collected.

Normally for professional polishing use liquid or paste-like compositions, as a minimum, spray. Along with them should be applied to polishing wheels of different hardness. Buy the whole set of tools and machines in the negotiation, does not make sense in view of the low usage and the high cost of these materials, you only have to go to the station. Just keep in mind that the cost of the restoration of polished several times more than the wax.

Victims of marketing

The most popular and often imposed on us to the sinks of service, it is a liquid wax. It is applied with a sprayer under pressure. You can tell us about the protection of the properties at the level of the solid wax. But, in reality a liquid wax just makes it much easier to clean the car after washing it, is the sliding of the water, and a cloth or brush glides better. Maybe this liquid polymeric material is better than nothing, but it quickly washed off, and forms a layer very thin. So that its cost can be save.


Automotive stores sell a lot of household, household polishes for use by the owner of the car. They have a different purpose and cost, but is usually aimed at short-term increase in gloss of a paint coating of the machine. If you want to take care of your four-wheel friend, of course, give him his attention. But the maximum result is possible only with the industrial of auto cosmetics and a good team.