In our article we analyse in detail all of the issues on the liquid crystal to drive.
This files most often is an aqueous alkaline solution of potassium or sodium. It has excellent properties of adhesive and not the passing of water.
To protect the car body uses a different chemical composition. Is the silicon dioxide, which may be made of glass of synthetic.
This treatment was car invented in Japan, 2008. The popularity of this coating is due to the fact that, unlike other compositions, it lasts long enough.
At this time there are three types of liquid crystal. It is from them is the fact that liquid crystal display for car, used as a Polish.
All three types of liquid crystal it is possible to conclude in a group monoschelochnyh compositions. In addition, there are combined and integrated. In Russia the majority of the production of liquid glass is the liberation of the compounds of sodium.
The most widely used in construction for waterproofing. But in recent years began to use when polishing a car liquid. With time the paint starts to crack and look unattractive. Car coating crystal liquid really will keep its appearance and protect against scratches, scuffs and cracks.
The producers promise safety to two or three years, but local drivers in our conditions of guarantee the protection of about a year. Use of compounds based on wax, silicone and other substances synthetic this warranty does not.
To perform the polishing of the surface of the body of the car you can have. To buy through can be in specialized stores. The kit includes:
There is also a manual with a detailed description of the polishing process in the Russian language.
Before you go to work, take care of the cleaning of the surface of the car. Must be clean, degreased and dry. Wash the car best special shampoos with degreasing effect. Old Polish should be removed with special tools.
The optimum temperature for the polishing of +10 to +40 degrees in the winter can be processed in a heated garage. In the summer the surface of the body should not be hot, you should avoid direct sunlight during the operation. The process takes 3-4 hours and is the power of everyone, if you follow the recommendations of the instructions.
By auto-polishing machine, the tool, follow all the stages of work:
Like all tools, liquid glass Polish has pros and cons. We have to consider the advantages and disadvantages of this type of coverage, and to make a final choice.
Among the advantages are:
But there are drawbacks:
Whatever it was, but the Polish in the form of liquid glass is by far the best protective coating for the car. Many of the comments of users to say,
The cost of liquid crystal is higher than that of the rest of the compositions for polishing cars. However, if we take into account long-term use and other advantages of the media, it is possible to speak about the efficiency of this treatment. For the application should only good to clean the surface, and this can be done with special shampoos.
Japan actually produces the best tools for polishing, but for the expenses that are more expensive than other manufacturers. Less expensive Polish is manufactured in the UNITED kingdom and Korea. In the composition, which is also different, there are liquid funds, and is in the form of pastes. Remember, the lower the price, the smaller the period of operation.