To make the vehicle attractive and Brightness, many people use protective products on the basis of ceramics. The unique composition of liquid glass Polish for cars, allows it to protect the car's exterior in the risk of adverse effects. Since the coating is used everywhere, it is necessary to understand their properties and the working principle. Among the many proposals on the market, you should select the best specimens.
The handling of the car, the compositions based on liquid glass was invented in Japan, 2008. The coating quickly gained popularity due to retention of protective properties. In auto-Polish includes silicon dioxide. Car treatment polishing liquid crystal allows it to protect the surface of the paint discoloration and to jump and to give the car an attractive look.
According to the domestic car enthusiasts, this composition is enough for year use. The proportion of oxide of silicon in the polishing 15% to 25%. This section provides a mirror gloss of the surface of the body.
The principle of operation of the Polish liquid crystal is in the interaction of the composition with the surface. In the liquid state, the substance which reacts with the top layer of varnish. The result of the LKP becomes more difficult at the molecular level. When the composition is applied, is kristallizuetsya 1.5-2 hours. On the surface of the body appears a protective film, such as glass. She is not afraid of the effects of the mechanical and weather factors.
Companies strive to attract customers with the original name of the whole and its long list of benefits. If you do not take into account the advertising tricks and tips for car owners, will remain the drivers of feedback and real world testing of different compositions. It is necessary to highlight some of the polishes liquid crystal display with the best features of the best ratings in the surveys of car owners.
Some of the popular types of products that can be applied, in the garage conditions. Professional of the ceramics used only in the service centers and is very expensive. When choosing a composition for the treatment, it is necessary to know the features and benefits of the products offered on the market.
It is important to understand the features of the independent processing of the car with liquid glass. The initial phase of training in which the car thoroughly washed and degreased surface of the painting. Solvents can not be used. After degreasing is carried out re-body wash and dry cleaned.
The Polish is applied in a clean room, without air currents, where there is no light of the sun, dust and humidity. These conditions are indispensable for the success of the treatment of the painting. Liquid crystal is applied to the movement longitudinal. Polish should not be placed too thick. After processing one section to the next start after 30-40 minutes. The excess Polish removed with a napkin of the equipment. Fully body dry for 12 hours.
The initial cost of the works in the processing of the outside of the glass is 8 to 10 thousand rubles. Include cleaning and degreasing, as well as the preparation of paint for the application of the ceramiste and subsequent protection with a special compound.
Treatment body polishing liquid glass allows you to update the design and give it its original Lustre. Through the application of a protective composition, the number of sinks is reduced.