Liquid crystal display for car — the pros and cons of covering your body

Well maintained shiny body of the iron horse is the pride of any owner. Currently, there are many options of care and the improvement of the appearance of the machine. The most popular is waxing. But modern industry does not stand still – the invention of new products, including innovative. These include liquid crystal is high-quality and simple-to-use tool, giving body to a mirror effect.

the coating of the bodywork of the vehicle liquid crystal display

What is the liquid glass features

After several years of exploitation of the bodywork of the vehicle decorative coatings starts to lose the brightness, scratches, scuffs, chips and cracks. To restore the appearance and protect the paint from further damage, many owners resort to various types of expolit, but its effect is very short.

Liquid crystal has been developed for industrial uses, but currently they are widely used as added protection of painted parts of the body.

Is added:

  • in molding the mixture in mechanical engineering;
  • in the manufacture of pulp in the light of the industry;
  • in detergents and cleaning products, paint formulations to impart a brilliant Shine to the surfaces treated;
  • in the production of acid resistant cement and concrete in the construction sector.

Liquid crystal is a modern and innovative, Polish, which guarantees a disguise minor damage to the paint and to ensure their protection. Can be processed into mirror surfaces of glass.

At this time there are three types of this type of coverage. Its base is made of liquid crystal display for vehicles.

The type of liquid crystal:

  • lithium is the most rare of time, the melted glass is produced in limited quantities, used for the thermal control coating;
  • potassic – is done on the basis of potassium differs from other species by its porosity and high hygroscopicity;
  • sodium produced in the sodium, has a high refractory settings.

Part of neopolyol, in addition to the above components, including silica, and additives special.

As regular polishes, liquid crystal created in the painted elements of the film, giving Shine and protection from external factors.

However, it is characterized by the significant differences:

  • the strength of the protective coating is several times higher than any other polishing compositions;
  • components of liquid crystal fill-in microdefects, including cracks, chips, scratches, the restoration of the microstructure of the layers and provide a mirror effect;
  • high heat resistance;
  • the duration of the protection and decorative effect more than six months, in some cases, subject to all of the technology application and future maintenance of surfaces, the use of quality product, the service life of this type of polishing can reach several years.

In which the cars can use modern materials

car coating, liquid glass

Basically liquid crystal is applied to the new and long lucratur cars. Perhaps the use of this type of varnishes, and in older machines without scratches deep, Ryzhikov and other serious damage to the paint.

When available, it is recommended to carry out a preliminary preparation of the body under the application of expolitio mixture of add-ons deep damage.

Most visual and aesthetic reflects the effect of the application is achieved when applied on the cars of dark color.

As a protection of the surfaces of the tool can be used in almost all cars, only in some cases, you must prepare carefully the iron horse for this procedure.

The pros and cons of this type of coverage

Body cover and other pieces of liquid glass first appeared in Japan in the year 2008 and since then the popularity of this medium is only growing. As with any medium, this mixture has its positive and negative nuances.

Pros car manipulation of liquid crystal:

  • protection of painted surfaces of motor vehicles external negative influences, including chemicals;
  • the increase of the color saturation and remarkable brightness;
  • when the independent processing of vehicles the processing fee is very affordable;
  • polishing the covering protects deeper layers of paint damage during the washing machine, especially when laundering of pollution, in a non-contact cleaning;
  • the whole life of liquid crystal is very long and is usually not less than six months, but the majority of 12-18 months;
  • while tarnishing any part processed Polish, you can always refresh in re-treatment;
  • the bodywork of the vehicle and other machined parts have pronounced water-repellent and lutum probationem properties;
  • the polishing composition has a high heat resistance and retains its appearance and protective properties even at high temperatures;
  • modern means protects the car from harmful effects of ultraviolet radiation, without passing it through itself;
  • the product is characterized by a high anti-static properties, the reduction of the contamination of the machine and allowing much less likely to visit a car wash;
  • expolitio composition adds strength to the surfaces treated, as it forms a layer similar in many aspects to glass;
  • liquid crystal is completely transparent which gives full color, painted details and gives a brilliant Shine;
  • the treated surface is protected from the appearance of streaks, spots;
  • after a lifetime of liquid crystal do not peel, and with time it becomes thinner.

Negative properties of this coating a little bit, and all of them can be avoided.

Cons of liquid crystal:

  • the high-quality formulations of proven manufacturers are very expensive, but you can save considerably for the self-treatment of the machines;
  • some complexity in its application and the need to strictly follow all the recommendations of the manufacturer;
  • the treated liquid crystal elements in any case can not be washed with abrasive media;
  • careful preparation of the surface for the application of varnishes;
  • the composition is not a car from stones and other serious mechanical damage;
  • to clean the machine from snow and ice, use a soft brush bristles, and use a scraper and other hard tools will damage the protective layer;
  • in the case of the old coating and the presence of deep damage need special work to prepare the surface for the application of varnishes;
  • when the independent work is required some of the tools, materials, knowledge, and the room with the necessary temperature, lighting and ventilation.

Body treatment and polished with liquid crystal technology process

To work with the composition and long lifetime of liquid crystal with the application requires a bit of equipment, quality staff, the room, pre-preparation of surfaces under treatment and strict compliance with all the process technology and manufacturer recommendations.


Qualitative application, the obtaining of the necessary appearance and protective properties, extending the life of the layer in the execution of the works will require some materials and tools that you need to get in advance.

Necessary Materials and equipment for work:

the coating of the bodywork of the vehicle liquid crystal display use
  • grinding machine with a rather powerful engine (more than 1100-1300 kW) and reducer with high gear ratio and the speed of rotation of the nozzle in the range of 1000-3000 rpm;
  • fur or foam pads in sufficient quantity for polishing machine for rough and fine polishing;
  • towels;
  • coarse and fine abrasives for surface preparation if there is serious damage to the car paint;
  • nonabrasive polishing tool for finishing the surface immediately before applying the liquid crystal;
  • the means of degreasing of the surface, in any case not to use products from within a silicone or poor spirits;
  • cloth of special fibre for polishing or cotton in the manual application of the composition;
  • rubber gloves;
  • a soft sponge.

Preparation of the surface

In order to get the desired result and increase the service life of liquid crystal is necessary to prepare carefully the surface.

Before beginning the work, the car must be completely clean of dirt and other polishes with them. After thorough drying of the body of the piece should be degreased with white spirit or other high quality degreasing compositions based on alcohols. In any case, you can't use the blend of degreasing with silicone.

If the paint coating of the vehicle has minor damage, which should be removed with a polishing paste. For this reason, the surface is initially polished with a machine Polish with nozzles for coarse polishing and use a medium abrasive pastes.

Expolitio the machine should be held with both hands to avoid the lack of control of the disease, it can damage the paint. The paste can be rubbed on the tip and directly onto the surface. Polishing of the surface of the vehicle must be gently, without pressure, trying to touch the entire surface of the circle in the painting.

The second time that the surface is machine polished with a finishing, nonabrasive tools for the elimination of minor damages. Polishing wheel it is necessary to use the other for fine polishing.

Relief and inaccessible to mechanical polishing space should be treated manually with a cloth or cotton cloth with a small amount of the paste abrasive.

Attention. In order to avoid overheating of the paintwork when polished you can't hold the disc in a single place. You must control the speed of the grinding machine, such as too low or high revs can also cause overheating of the layer, and damage.

After each polishing step the surface must be washed to remove the paste and the powder after the intervention.


After rubbing, buffing the filter body must be thoroughly clean, dry, avoiding contamination and degrease.

Before the application of liquid to the glass surface to cool completely. The work should be carried out in a closed from the direct light of the sun and the dust, well ventilated, dry room with a temperature range of 10-40 degrees above zero, ideally 20-22 degrees.

the coating of the body of liquid crystal

Before the start of the work to be checked by the team of buy part, and if it is necessary to Complement it in advance.

Basic Polish:

  • base composition;
  • pipette;
  • hardener;
  • the fiber for manual polishing;
  • towels;
  • soft sponge;
  • gloves to protect the hands.

The vast majority of liquid crystal is a two-piece tool, which must be mixed in the proportion indicated by the manufacturer. The mixture of the components necessary to carry out portions to prevent curing of the composition.

Application of liquid crystal arrives in certain areas, not everywhere. Normally, this type of processing start or the front bumper or right front fender. The transition to the new site should occur only after the completion of the previous one, and therefore the application of the agents do not have time to freeze before the appointments with him.

After applying a small amount of Polish on a small area must be in a circular motion RUB gently the fabric fiber.

During the polishing work must be careful, so that the surface does not reach the earth. The treated area must be covered with towels supplied, to protect from the dust.

After processing all the area of the body of the car has to leave for 4-6 hours to the configuration of the application. Buffing the final solidification of the composition occurs with less than 14 days.

During this period, the car is not recommended to wash. After completing the hardening of the liquid crystal acquires the protection of the properties in their entirety.

Liquid crystal is a modern protective agent, which imparts a brilliant mirror finish and enhance the depth of color in the painting. With the proper approach and careful adherence to all stages of car preparation and techniques in the tools of drawing, painting will earn a incredible mirror Shine and will be permanently protected from the negative impact of external factors.

To lengthen the useful life of this type of polishing is necessary to avoid contact of the surface treated with abrasive means, including a scraper for cleaning snow and ice.