Wax car Shine and protection

The car always seemed solid, is followed correctly. If the body is bright, then any car looks more expensive. This effect is achieved through the use of the wax, which is the most popular method of treatment of the body. Type of wax, but not all give good results. Will tell you what are the tools and how to use them correctly. Also, keep in mind, some manufacturers have been recognized, and that to pay attention to when choosing wax for a car.


What is the treatment car wax

In addition to the beautiful appearance, the wax to the bodywork of the vehicle that performs a series of tasks:

  • Protects metal parts from oxidation.
  • Masks minor scratches.
  • Is formed on the surface of the exterior film that protects the surface from moisture, small stones and other environmental factors.
  • Extending the life of paint and varnish that cover the body.
  • Facilitates the process of cleaning.

Best wax for car is that it not only looks beautiful, but protects the body.

The type of car wax

In the market there are five varieties of wax to the car:

  1. Spray.

    Its peculiarity is that it is very easy to apply. However, among the car enthusiasts and specialists of this coating is considered the worst option: often, this wax is washed after the first car wash.

  2. Liquid wax for car.

    The application process is more complex than in the case of the spray, but the effect of its greater duration. Usually, the manufacturers guarantee that the coverage is enough for 4-5 washes.

  3. Solid (hard) wax. the type of wax

    Sophisticated technology application, which includes thorough polishing of the car. If the right to perform the work, the coating will stay 3-4 months.

  4. Synthetic wax.

    It is recommended to use in winter to protect from snow and cold. In the case of a competent application of the coating is maintained until 6 months.

  5. The hot wax.

    The main advantage of this tool before wax cold for one car in a pronounced brightness to the surface of the body. The coating has good protective properties. Service life depends on the specific composition.

How to apply the wax on the car

Instructions for the use of the wax is available in each package, and for this reason it is important to follow it point by point. The specific steps depend on the type of wax that you have chosen. We give only a General idea about the process.

Regardless of the choice of means, before processing a waxed car, it is necessary to prepare:

  • Wash thoroughly the surface to remove even the smallest dirt particles. If this is not done, the wax can go well and very quickly to escape. For a more efficient wash, use a car shampoo.
  • Wait for complete drying of the car, if you are using hard wax, and partial drying — if the liquid wax.
  • To put the car away from the sunlight in the room, closed against the wind.

Cover car liquid wax

how to apply the wax

First we need to dissolve the wax in hot water: the temperature and the proportion should be indicated on the packaging. It is important that the temperature difference between the body and the diluted wax was not more than 20 degrees.

Coating of car wax usually takes 20 to 30 minutes. Start with the roof and slowly go down. After the entire surface to be treated, you must wait 1-2 minutes, and to manage the vehicle with air to remove excess moisture. Then, the body first with a cloth, a sponge or cloth with great care, assign and fix the wax to the surface and remove the excess.

How to cover the car hard wax

When working with a solid structure you need to follow the instructions:

  • Apply a small amount of wax in a small area.
  • Bring a cloth or sponge and carefully spread the wax over a greater surface area.
  • Repeat first two steps until you cover with wax all over the body.
  • Wait until the medium dries out. Exact drying time depends on the specific composition, and is usually indicated on the packaging. You can also set it for outside signs: arida wax gives a matte patina over the entire surface.
  • Take a microfiber cloth and complete the polishing of the body to Shine.

Before you apply the wax in the car, make sure to watch the video to have a more visual representation of the process.