If we are talking of liquid crystal in your car, in this case refers to special solutions for polishing and protecting the bodywork. The latter is quite varied (silicon, oxide fluoride, titanium oxide, ceramic, quartz, etc.), that allows you to get different practical properties. Use auto polishing liquid crystal is not only the body, but also for glass and wheels. The essence of this method consists in applying on the surface of a fluid medium, which in a certain period of time it freezes. The result is a protective coating that the basic ways of painting and painting as a single layer.
Daily of the surface of the bodywork of the vehicle is subject to mechanical, chemical and thermal stresses. With time, this not only makes the appearance of the car worse, but that destroys the layers of varnish and paint, and then metal. With the exception of automatic protection coating (liquid crystal, traditional, polished, ceramic, wax) moisture and dirt slowly penetrate deeper, causing the formation of corrosion (rust). Last destabilizes the body, the reduction of the protection of the fundamental technical parts of the vehicle.
Attention! This method is not an alternative to varnish, but provides an additional protection.
To mechanical damage of the body are streaks that appear in the impacts of small stones, hail, debris, trees, claws of animals and birds, choose your car as a place of rest, and as a result of other household and emergency situations. Chemistry of the exhibition - that is, mainly, the salt and acid contained in atmospheric precipitation (rain, snow) and also destroy the ground cover. In addition, in the winter to remove the ice on the road, utilities often use chemicals that get on the bodywork of your car and slowly destroy it. Thermal effects are well-known changes in the temperature of the heat of the sun in the summer in the afternoon and up to strong cold winter nights that cause the formation of cracks in the layer of paint. Car coating of liquid glass allows to achieve various objectives in the solution of this problem:
It should be noted, also, that the main practical properties of the layer of liquid glass or pottery for cars is hydrophobic and antistatic. In other words, the tool repels the water and dust particles. In practice it looks as follows: liquid that falls to the surface, will be treated in a medium, droplets that are actively dripping down the shiny surface, parallel to the current, washing away all the dust.
In most cases, you can apply liquid glass to a car with his hands. The only complexity of the technology lies in the correct preparation of the surfaces. Select the work place with normal temperature, so that the possibility of contact with the body of dust, sunlight and, especially, the precipitation was minimal. Thoroughly wash and dry the car, and, if necessary, and apply a universal degreasing agent. It is very important to make the liquid crystal in the car should ideally be in contact with the main surface. You need to work alternately with separate areas, an area of about 0.5 square meters. It is more convenient to start with the roof. The liquid should be applied to the sponge included in the kit. Then gently treatment of the surface with the help of a sponge. According to the chosen brand, after that the application will have to wait a certain time interval (specified in the instructions), then make a small polishing cloth is also included.
After processing the whole car need to eliminate touching the body for several hours.
Of course, as a promising market of liquid crystal to the bodywork of the vehicle, attractive for a large number of manufacturers. Among them are the representatives of different countries and price categories: V-MAFA (China), GYEON and CQuartz (South Korea), Nanoskin (USA) and Willson (Japan). Also, the list of brands of varnishes and liquid glass for cars, you should think of Everglass ceramic coating at a professional level, unfortunately, available for the its application only in the centres. The choice of a liquid crystal display for cars, which is better is a moot point. Here we have to consider a balance of cost, duration of action, resistance to detergents, ease of application, the strength of the layer and water-repellent properties. As well, each brand has its own characteristics. For example, liquid crystal for cars Willson glass guard, which is used silica, when applied to the body allows you to protect a minimum of a year, at an average price of $ 60. By the way, this line has products for dark and light cars, which helps to restore the brightness of the original color of the body.
Liquid crystal produced by many manufacturers of protection products for cars. You can always find something suitable
Korean brand CQuartz also uses silica and can withstand up to fifty washes. Price range of $ 50, but the main advantage of this tool is to adapt the means to our climatic conditions. Its sister brand, the PURPOSE is to preserve them for eighty washes. Therefore, the evaluation of the antistatic properties of this liquid crystal display for cars, owner reviews indicate that the intervals between cleaning are significantly increased. In turn, domestic series KillAqua offers protection from six months to three years, at a cost of $ 80. But with regard of this brand there are very controversial opinions. So, for some, the actual price for the quality too high, other and not reported a positive effect.
In summary, in relation to the treatment of auto liquid glass, there are several key points that give an idea about the feasibility of this procedure.
As you can see, the advantages of this method of protection is much more than the cons and you only need to decide which brand is right for you.