Owner reviews on liquid glass for cars, advantages and disadvantages, application

Lengthen the life of the bodywork of the vehicle and keep the Brightness of the lacquer coating, especially under adverse weather conditions, it will be possible only with additional protection not covered by the original manufacturers. For this reason, we have produced a great deal of funds, but in recent years, there is nothing more popular liquid crystal. Reviews of car owners to prove their high efficiency.

What is the purpose


This title means Polish belonging to the class of ceramic coatings based on nanotechnology. The base tools are complex chemical compounds:

  • the oxide of titanium;
  • the silicates of potassium and sodium;
  • the aluminum oxide;
  • decamethylcyclopentasiloxane;
  • surfactants (less than 1%);
  • in nanoelements.

This liquid wax was invented to protect the body of 2008, and in the Russian market came from Japan around 2 years. Initially, the tool was a two-component composition. The disadvantage of this glass lies in the fact that the kit includes 2 tubes.

It must first be diluted in a ratio of 1: 1 strictly in accordance with the instructions, and after the treatment of the surface. Did the Japanese liquid crystal is a bit awkward to use.

Next was an updated version of a component of the glass. This innovation does not require training and can be applied immediately after opening the container. This best protection for car today so the experts say.

Due to the absence of pigments, liquid crystal to protect the auto used in the light and darkness of the surfaces. The purpose of the treatment there is no need to buy special equipment.

Polished provides all the necessary tools:

  • the special cake (applies to glass);
  • polyethylene glove (protects your hands);
  • wipes to Polish the surface.

This Polish does not protect the machine from strong influences and mechanical damage, for example, in the case of accidents.

The mechanism of action and properties of the Polish is "Liquid glass"


In a climate more mild car polishing liquid crystal provides protection of up to 1 year. But in our conditions, is held on the surface of the body for about 8 months or up to 100 washes.

Directly the mechanism of the glass is reduced to the following stages:

  • After the application of the interaction of the dough with the top of the layer of paint coating (LPC).
  • Composition kristallizuetsya and fixed.
  • Form an invisible film, which has a number of properties.

Advantages of

Unlike conventional wax and polymeric protective coatings, Japanese nano creates in the body more resistant very thin film of protection. The advantage of the resulting cloak is that with the use of this glass is not formed abrasive body Polish.

As you know, this coating protector only done 3 times, after that the car must be repaint. That is to say, it is absolutely safe for the car in terms of paint damage. It is possible to manage the body of an unlimited number of times.

Processing machine with liquid crystal display allows the owner to obtain the following advantages:

  • Fewer impurities, including dust (antistatic effect).
  • The durability and depth of color
  • Protection of the discoloration of the paint.
  • The softness of the coat and gained a glossy Shine (the effect of a new transport).
  • Great resistance to scratches, chips and other small mechanical damage.
  • Protection against harsh chemicals (salt, gasoline, oil, road reagents).
  • Protection against corrosion due to the water repellent properties, hydrophobic formed film.
  • The elimination of small defects of the body.

Negative qualities

Before and after

Those who have already used Japanese, Polish, damage and other disadvantages of liquid nano speculum directly to a car that have not been revealed. The main disadvantage of a liquid ceramic is the fact that the machine owner will have to spend a minimum of 3-4 hours. Time to lengthen, if everything is made by hand, for the first time, without sufficient experience.

In addition to the process that requires a lot of patience, another disadvantage of this glass can be attributed to the lack of desired result in the violation of the application of the technology. Therefore, if the owner found this class for the first time, it is best to consult with a doctor and have yourself thoroughly to learn the rules of treatment.

In temperatures below zero, to apply the wax is impossible. The ideal conditions for the process – 15 to 30 degrees.

Instructions for use

We are going to consider in more detail the question of how to put liquid glass in the car, if it is already available. The process is divided into several stages, each of which is very important.


Before you cover the car with the liquid crystal, which first has to be washed thoroughly by high pressure method special means of the surface of the body, so that does not leave any pollutants. Even if the car is new, it must be done necessarily, because there could be remains of the factory of the oil.

Then, the procedure of preparation is reduced to the following steps:

  • Degreasing the surface of the body with special solutions (antisilicone or alcohol). It is forbidden the use of these solvents.
  • Re-wash with just water, no shampoo
  • Wipe the body dry.


Body plating liquid of nano brand Wilson should always be carried out in a clean and draft-free room where no sunlight penetrates, dust and moisture. in a uniform manner. This is one of the main conditions to achieve the desired result.

The technology is the following:

  • Moisten the sponge with the Polish.
  • Visually divide the body into small areas. Once the entire surface to try and quickly fail, so every detail is polished separately. For example, the work can begin with the wing, bumper or bonnet.
  • To start to cause the liquid mass that flows in the longitudinal and not circular movements. It should not go in a thick layer.
  • When a certain portion is processed, to wait 30-40 minutes to start the polymerisation process. At this time, you can process another part of the body.
  • Then takes a napkin from the kit and remove the excess composition.
  • Then that is not chaotic but uniform and smooth motion without pressure to keep your hands up and down, it is the process of polishing to a mirror finish.
  • Once the whole body is protected, you must give the vehicle about 12 hours to dry well.

You can't leave the team after the first layer is more than 1 hour to solidify and they become impossible to Polish the surface.

Attention to treat the car

If you've made a cover of the cars of liquid crystal, the surface is forbidden to wash for 2 weeks. This is the amount you need to layer fixed on the lcp the body.

Otherwise, the question of how to take care of the polished body of the car, this tool disappears. After all, he also does not really stick to the ground, and therefore the number of sinks will decrease in 2-3 times. To get a fresh look, it is sufficient to rinse the surface with plain water without using special shampoos.

For sale is a Polish called "liquid glass" in specialized stores. But the shop owners to hire him via the Internet, putting your mark-up, sometimes quite considerable. Therefore, if we do not want to pay more, any car owner can also buy these products on the website of the service provider, but at a lower price.