Hard wax for car: benefits, the process of applying

There are many different tools that is intended for the treatment of the body of the vehicle with the most protection. Some of these substances, such as waxes, do perform a function to resolve. Your attention is given a detailed description of the varieties of wax. Also, learn about the characteristics of this coating of wax, and that technology is used by the application. What is the best hard wax for the car? Qualification and application of the technology. About this and more.

wax for car

What is it?

Wax for car is designed to protect the paint. This tool creates a kind of cinema that preserves the integrity of the body from various minor damages and cracks.

And in that moment, when it was applied to the painting, where it was already damaged, it can hide the flaws and protect the body from further damage. Because the wax prevents the entry of water, salt and other chemical components of the metal, it is corrosion-resistant. On this basis, it is evident that the wax is an excellent protection for the body against UV rays, rust, minor scratches and chips.

How to protect?

Applying wax on car body after washing the car makes the look and feel of the vehicle more attractive, the paint becomes shiny. Wax helps protect the drive from drops of water that fall on the vehicle, drain and slowly dry, without leaving a trace.

The type of wax

Must be divided according to different classifications:

  1. Solid.
  2. Liquid.
  3. Spray.
  4. Synthetic.

Wax spray is not popular, as that just protects the car paint and wash it off after a few washes. For this reason, drivers often refuse this type of protection. But in spite of this, wax spray elemental is applied to the vehicle.

Liquid wax due to their properties highly resistant to various impacts in comparison with the spray. Application of technology is not simple: it is necessary with a soft cloth to apply on the body and little by little the eggs.

With regard to solid wax, it has the distinctive properties of the application. Should be applied on absolutely dry surface of the body. This process takes a lot of time, but the result lasts much longer: a protective wax is enough for 3-4 months.

But synthetic wax is the most persistent, that allows you to protect the coverage of six months. Apply synthetic wax is very simple: it lends itself to a uniform distribution. This product is part of certain special shampoos for vehicles.

how to cover with wax

Classification according to the method of application

It also has a classification for application of the method.

  • Hot.
  • Penn.
  • Cold.

Cold wax is a liquid special, which consists of a large number of cationic components and a wax emulsion. This unusual cover for a car is applied by hand. But it has one significant drawback - which, unfortunately, is still too long. To consolidate the effect, after each car wash that you need to re-apply.

Hot wax in the composition is a liquid or substance that has a natural or an artificial origin. This substance melts at a temperature of 90 degrees Celsius. This type of wax is considered to be the highest quality, as it is completely transparent, the car does not remain any trace.

Hot wax is highly susceptible to different times of challenges. The material for a long time, retains his capacity for work. For six months, the owner can not remember that the body must be protected from corrosion or any other influences. The technique of hot wax is that it must be diluted with warm water, and then with a soft cloth or a sponge to RUB the whole body. The only disadvantage of this substance is its high price.

Foam wax characteristics have complete similarity with the heat, but the only difference is the method of application. Distribute this substance to cover the car manually it is impossible, because it requires special equipment. This device must form the emulsion of foam with the air and the water. The use of this wax enables a high degree of protection for the paint.

Classification by origin

Wax for car, has various types of origin:

  • Bee.
  • Mineral.
  • Synthetic.
  • Plant.

Its composition, each type of wax has a General resemblance, therefore, pay attention to the choice of coatings for the protection of the body types of origin is not necessary.

Depending on the variety of solid wax for the car, which has its own characteristics.

While the selection of the wax for application to the body of the car must consider the fact that the too low price means that it is unstable and will last a long time. Liquid and solid materials often fulfill only the cars, which use no more than five years.

And for those vehicles that are a little older, the ideal abrasive polishing. Wax provides the perfect protection for the body of the polishing makes the appearance attractive due to the fact that it has been removed the top of the layer of lacquer.

Wax with abrasives is similar to the traditional polishing, so that while choosing the makeup that you need to take into account this option. Abrasive wax is necessary in order to improve and update the appearance of the machine and remove any defect.

For new cars, our coating has no defects, you should use a pure wax without any additional components.

Some features of front, car hard wax

Cover the car wax you need in the garage in order so that doesn't receive direct sunlight. Before applying the mixture, you should mix everything thoroughly. After I polished the car, it has to dry and clean the surface with a cloth or paper towel to dry.

It is worth noting the fact that often the layer of hard wax on the car included a car wash.

hot wax

At the time of shampooing, which includes the wax, the car should be washed with hot water. At the time of applying the coating to the bodywork of the vehicle must do the same movement from top to bottom. When washing the vehicle wheels it is advisable to wash it with another sponge cake. Also, try not to use silicone tools and shampoos that in its composition are the alkali or acid. It will have a negative impact on the state of the vehicle.