Well and shiny car always looks expensive and prestigious, regardless of their real value. As a special tool, generally used compositions are wax-based, but today there are easier to use and more qualitative tool for polishing cars called liquid crystal. About this later in this article.
Liquid crystal has recently enjoyed a great popularity among the drivers. After processing this part of your vehicle will sparkle like a jewel. In addition, the liquid crystal has the ability to remove minor defects, scratches and cracks on the surface of the bodywork of the vehicle. This product protects the car from further damage, rust and UV exposure.
This deck looks very fragile, but this fragility is just an illusion. In fact, the film of protection is very solid. In the glass products are not included, and its main active element is the silicon dioxide. This component at the molecular level interacts with the paint coating. In the end, on the surface of the bodywork of the vehicle occurs, the film mirror effect, which is relatively high power. In addition, it is durable and can serve its owner for over a year.
Today, there are three variations of liquid crystal.
It is through these media is the fact liquid crystal, used as polishes for car:
All three types of liquid crystal can be combined into a category of certain compounds. In addition, there are integrated and combined. Sell liquid crystal. For example, in the form of containers with the liquid that should be applied to the surface of the car and wait in the drying – media kristallizuetsya and creates a shiny surface.
Apply liquid glass on the car you need in several stages.
The equipment should include basic composition and a hardener, the pipette (need for mix), protective gloves, a soft sponge, towels, and in particular of the fibre by manual polishing. If there is something missing, it is advisable to buy.
It is not recommended for the treatment of liquid crystal, if the car was a time in the sun and heats up significantly – it is important that the metal was cold. Experts recommend to carry out all work in a warm and dry place, avoid sunlight and dust. The temperature should be 15 to 30 degrees.
In this stage, you should wash thoroughly the vehicle to remove all contamination. Then, remove the fat from the surface and give the car to dry. Degreasing is carried out by means of diluted in water and white spirit. Prohibits the use of poor quality alcohols or silicone tools are also unacceptable use of funds, leaving a film. If the car body was already covered with any of the polishes must be removed. Otherwise, the new coat will have a duration much less at the scheduled time and will not stay on the surface.
At the end of the preparatory work, start to Polish the car with the liquid crystal. Do not apply makeup to the entire surface of the body – it is advisable to practice on a small area of the car. If the Polish provides the expected result and, typically, adjacent to the surface, unable to get to work.
Apply liquid glass has been polishing each section. For example, you can start the treatment the bumper or from the right. Once polishing of one element is completed, proceed to the next stage. This approach has its advantages. First, the applied medium is not dry. Second, to achieve a higher quality to do the job.
After applying a small amount of the composition on the surface, it is necessary to RUB with a soft cloth, which should be included in the package. In the process, the procedure, make sure that the surface of the car is not exposed to dust or dirt. Once you do all over the body, leave the car only for 4-6 hours. In this case, molten glass is, finally, seen in two weeks. Preferably in this period does not wash the car (especially the sink).
The effect after using liquid glass is awesome. The body of the car shines as if just out of the hairdresser. The color was rich and bright. Drops roll off of the car, and it looks very good. Compared to conventional wax tools, liquid crystal is much better.
In addition, it removes fine scratches, protects the body of the mold, the discoloration and waterproof properties. Machine polishing with the liquid glass, much easier to clean, not stick in the mud, and the film protects the car body from damage.