Liquid crystal display for car: application methods, advantages and disadvantages

Any car, but gently, didn't move, with time, the defects in the paint. Most scuffs and small scratches. To body glowed again, you can paint, but it is very expensive. It is much better to cover the car Polish, fortunately, there are now a large number.

liquid glass for car

The main drawback of this type of tools is that the protection of the body remains relatively short period of time. To make life easier for motorists in Japan have created a structure — the so-called liquid crystal, which is able to save the shine for 3 years, but in our reality, this polishing body retains in its original form for not more than 1 year.

What is the liquid glass

Is the chemical composition, which is based on silicon dioxide. After the application of the car in the body form a protective layer that protects the paint from dust, dirt and various mechanical damage.

Talking in plain language, this drug is, in fact, glass, as such, is not the name simply describes the results of the effect of the use. The car just starts to Glow, as if she poured a real glass. Despite the fact that the Polish is transparent, it is divided into two types: for dark and light cars.

Preparatory work

The first stage of polishes is the preparation of the surface. How to prepare will depend on the final result.

  1. Preparation of a kit. In general, the tool that comes with the following equipment: polisher, polishing towel, sponge, gloves, hardener. It should be noted that the hardener is present only in the two components of the compositions. Each component is very important and if not included, you should buy from a retailer.
  2. Preparation of the body. The first thing you need to wash and dry the car, and then degrease the surface. If this is not done, the service life of the polishing can be reduced in several times.
  3. The choice of location. It is not necessary to apply the composition to the street. The dust and the dirt will quickly settle to the surface and can significantly spoil the appearance of the car. Yes, and the ultraviolet rays are not the best way to affect the result. It is best for this purpose, suitable garage, it is dry and warm, and is an important factor for the high-quality processing of auto liquid crystal display.

Car cover

  1. Before applying the composition of the product, you must treat as it interacts with a small area of the body. If poorly applied, check that it has dissolved the wax, as well as the body is washed of dirt.
  2. To manage the car must be fast, to avoid drying polishes.
  3. The processing is necessary in order to carry out circular movements with a special microfiber cloth, this method is used when there is no machine polishing.
  4. Keep the surface clean.
  5. After the treatment, it is necessary to leave the car in the dry for 3-6 hours.

It should be remembered that the cure of the composition occurs only in 2 weeks, and during this time it is not recommended to wash the car as the sink and manually.

The benefits of using

  1. Low-cost. In comparison with analogues, coating machine liquid crystal is much cheaper, which allows to apply the protective layer, even in the budget car.
  2. Resistance to chemical attack. The application of this Polish will help to protect the body, not only from mechanical and chemical influences.
  3. Resistance to moisture and dirt. When covering a car with liquid crystal will be less likely to visit a car wash as dirt does not stick to the surface of your car.
  4. Protection from scratches. The paint of your vehicle will be under reliable protection in all conditions, whether it is a trip in the countryside or around the city.
  5. The saturation of the color. Coating of liquid glass gives your car a brilliant saturated color and protects the paint from fading in the sun.
  6. The quick recovery. If any part of the body has faded or been damaged, then it can be restored very quickly, and with minimal costs.
  7. A long service life. You can maintain the protection of the properties of the 12 months. After this period, you only need to update the layer and polishes.
how to apply

Disadvantages

As with other polishes, this tool has its drawbacks, among which it is possible to allocate such as:

  • the application of the drug, sometimes you need a special tool — grinding machines, which is not always convenient;
  • the deck takes much less time than painting, but is a lot more than dry;
  • the inability to produce work at a negative temperature.

But, in spite of the flaws, today is the best liquid glass Polish, providing a high level of protection of the organism against external influences.

16.11.2018