There are a large number of modern polishing technologies, each of which allows you to get a high quality glossy protective coating for the car. Among the many options, liquid glass for cars deserves special attention. This is the perfect opportunity to give your car a high gloss and perfect environmental protection.
Liquid car glass is a product and technique developed by Japanese experts about five years ago. Now the technique of covering a liquid glass machine is widely used as an additional protection against dirt and various mechanical damages.
Liquid glass plate effectively fills various microcracks and defects present on the surface of a car. Because of this, the coating structure is completely restored and an attractive mirror shine is given extra to the car. Another important useful factor is the ability of liquid glass to protect the car from the highly aggressive impact of salt and reagents used in the cold season.
Before purchasing and applying the described composition, it is worth studying in more detail its features, advantages and disadvantages. The main positive factors of using liquid glass include.
Along with many positive features, liquid glass has some disadvantages. It should be noted that washing a machine with conventional chemicals seriously reduces the strength level of the applied coating.
Machines covered with liquid glass should be washed with plain water and even without rags or brushes.
It is also worth noting that glass is not very flexible. In the event of an accidental collision with an obstacle, there is a risk of damage to the gear. At the same time, we can observe the reduced resistance of liquid glass to very low temperature conditions. These factors can be significantly improved if the application technology is violated. If the dressing process is done properly, many problems can be avoided, the dressing will last at least a year.
Before describing the features of the question solution - how to cover the car with liquid glass, you should pay attention to the rules for choosing the composition. You need to start by considering the types and categories of composition used as the basis for the production of liquid glass on the market. Here are the three most basic.
These are all monoalkaline formulations, but there are also complex and combined options. Answering the question - which glass is most suitable for a car, it can be noted that any clothing can be used. Whichever liquid glass dressing option is chosen, the benefits of applying it in any case will be a larger sized ranking.
The most important thing in the process of choosing the optimal composition is to take into account the manufacturer's recommendations regarding the complexity of the application.
Experts strongly do not recommend buying a self-application composition, which was originally intended to work in a professional environment. The reason is that it will be quite difficult to apply such a composition and follow all the technology.
In order for the process of applying liquid glass to the body of the machine to bring pleasure and, most importantly, to ensure a consistent result, you need to follow a certain sequence of actions. Here are some of the key steps involved in applying liquid glass to a vehicle.
Before starting work, you need to prepare the necessary materials and tools. The following tools should be included with the standard plate:
If any of the above are missing in the composition, you should definitely buy it.
it is imperative to prepare the surface of the machine. This is one of the important stages in the polishing process and should not be overlooked! The preparation consists of the following sequence of actions:
It is strictly forbidden to use mixtures containing low quality silicone or alcohol for grinding.
Another important rule is to remove the previous tile. Failure to follow this advice will lead to the fact that a new layer of water glass will hold the surface much less than the period guaranteed by the manufacturer.
Equally important in the preparation process is choosing a job site. Preference should be given to a dry, ideally ventilated place, where the temperature varies from 15 to 40 ° C above zero. The best option would be to do polishing in the garage, you can also be on the street, but always under a separate tent.
When applying makeup, the body should not be exposed to sunlight as well as dirt and dust.
After completing the preparatory work, you can start the polishing process of the car yourself. If you have no experience, you do not need to immediately apply the entire composition to the entire surface of the body, it is advisable to practice a little on a small area. If, after the test activities, the tile sticks well to the surface, if the desired result is achieved, then you can start the work process.
Liquid glass is applied gradually, it is important to carefully process section by section. Many professionals advise starting with the bumper or right arm. At the end of processing a part, you can proceed to the next step, to rub the surface with a soft cloth, which is usually included in the bag. This approach will allow for better work performance as well as avoid drying of the applied coating, which is convenient if you need to correct some deficiencies.
Once the whole body of the vehicle has been processed, leave the car alone for 4-6 hours. Only after that, you can start moving in the car, but without visiting washes the car, as the final setting of the composition occurs after about 14 days. After only two weeks, the body of the vehicle is completely protected from ultraviolet radiation, mechanical stress and other unpleasant factors.
On average, covering a car with liquid glass takes about 5-6 hours, and if this is the first time, then even more. This is a very tedious process that not everyone can afford. As you gain experience, the task can be simplified by using a special grinder. You will need to purchase this device, select a special soft polishing pad and set the medium speed mode to device.
Thinking of a pro! During processing, you do not need to apply strong pressure to the grinder. This will avoid unnecessary surface overheating.
If there is no opportunity and desire to get a professional grinder at your disposal, a basic electric drill, available to everyone, is an optimal alternative. The main thing is simply to choose a nozzle for a strong fixation of the polishing wheels.
If done properly, you can enjoy your car body all year round. It will need to be updated about once a year. Once the dressing is fully set, you can visit the car wash or fix the vehicle with a water bottle and a clean cloth.
Many drivers wonder - how much does it cost to polish a car with liquid glass? The cost of the compound, which is able to protect the vehicle body from damage and scratches, depends on what class of car it is intended for. Mimi is quite affordable and will not require serious investment if you do the coverage yourself.
The cost of the coating is much more expensive than the tiles, but the service life of the liquid glass is much longer. Car owners who have already applied a similar outfit to their cars, notice that the effect obtained is fully valid for the money spent. The car will delight the driver and those around him for a long time with his clear glow in the mirror.
Liquid glass is the ideal protective agent for the car body at the moment. When dressed properly, the car will look perfect and very impressive. The body becomes resistant to dirt, at first a bottle of water will be enough to wash the vehicle after a long journey. Renovating a smooth finish in a timely manner will keep your car looking new.